1. This product is woven by modified polyester fiber.
2. The heat resistance is F Class (155 ° C).
3. When the temperature reaches 150 degrees for 10 minutes, the shrinkage rate reaches 30%.
4. The product is beneficial to the fastening and integrity of the ligating part, and the tensile strength is high, and the workpiece processed by the shrinkage belt can save the amount of the immersion paint and the appearance is standardized.
5. It is suitable for the binding and fastening of wire and other parts of motors, transformers, reactors and other products.
About shrink tape,usually we will be packed by three-layer, the first layer is a plastic film, the second layer is a carton plus a packing tape, and the third layer is wrapped with a plastic film. This will prevent the goods from getting wet and rubbed during transportation and ensure that the product arrives at your destination in good condition.
Indicator name | Unit | Index value |
Nominal thickness | mm | 0.23 | 0.26(oblique) | 0.29 |
Width deviation | mm | ±1 |
Shrinkage | % | ≥30 |
Tensile Strength | N/10mm | ≥200 |
Broken | Single | mm | ≥200(no) |
Double root | ≥30(no) |
Side | - | Unaffected loose edges, tight edges, thick edges, thick edges |
Inclusion | - | None |
Stains | - | No rust, the sum of oil length and width ≤14mm |
Broken head | - | Allow each disc to have two segments, each segment not less than 3m in length |
Hole | - | There should be no warp, latitude, or more than 3 holes |
Storage period | Month | The date from the factory is 12 months, and the product is tested according to the product standard for more than 12 months. |
